Atomstack s10 pro laser engraver

This laser engraver is a high-end diode laser engraver that is still very affordable compared to many of its competitors.
https://www.atom-stack.com/products/atomstack-s10-pro-50w-diy-laser-engraving-machine ,
The Atomstack S10 Pro Laser Engraver is a fixed focus laser engraver with a 445nm wavelength blue diode laser, the laser itself has an output of 5.5 watts, perfect for anyone new to the world of maker culture Choose from general, or dedicated to laser engraving and cutting. It comes in kit form with simple instructions to help you put it together, luckily it's not a very long process to get it done. There are no IKEA-level issues in these directions.

https://www.atom-stack.com/products/atomstack-r3-24w-automatic-rotary-roller-laser-engraver ,

It took me about 30 minutes to get things up and running, and it was mostly straightforward. The only caveat is to place the track inside the beam to move the laser and cover the engraved area. The kit comes with all the tools you need to put it together, but it would be helpful if you had some anti-static tweezers or similar on hand to help pull the rubber tracks.

In addition to the getting started guide, the S10 Pro comes with some documentation in PDF form, which you can find by scanning the QR code on the front of the manual. This walks you through the process of using the laser, and it's pretty easy. The user manual recommends two different software for you to use: LaserGRBL is a free and more user friendly, but somewhat basic software option, while LightBurn is paid software for more advanced users Function.

https://www.atom-stack.com/products/cheap-laser-cutting-honeycomb-worktable-atomstack-with-fixtures ,

After downloading the software, the manual will guide you in setting the focus of the laser. After placing a protective surface under the area to be engraved, place the object to be cut or engraved under the laser, then loosen the nut on the back of the laser shield and place the aluminum focusing post under the shield. Then tighten the nut again and the laser will be at the perfect distance from the engraving for best results. Since it's a fixed focus laser, it's super easy to set up and get ready to burn with consistent results every time.